Jun 06, 2017 Select the Clover box under Install MBR if you want to boot Clover in Legacy mode. Click MAP button. The tool will back up the partition table information for later restoration. Choose the external drive that we named ‘Mojave HD' or ‘Mojave SSD' in step no. 6 and click ‘Install' Wait for the installer to finish and restart the system. As soon as system restarts, start pressing the boot options key usually F12 and choose your external drive from the option and press ‘Enter'.
- Install Dmg On Iphone
- Clover Install Dmg On External Drive File
- Clover Install Dmg On External Drive Mac
- Clover Install Dmg On External Drive Iphone
As Apple is releasing an operating system per year and one of the best operating system called MacOS Mojave. MacOS Mojave is a friendly and best operating system, although it has tons of new features and that is handy for Mac users. However, you are using Mac computer or Hackintosh PC then you are curious to know about How to Install MacOS Mojave on PC-Hackintosh. therefore, in this article, I am going to guide you with best and easy steps that you can easily install MacOS Mojave on Hackintosh. So, we will complete the installation by using the Clover EFI Bootloader, but how you can do it, you will learn here.
Installing the Mac operating system on Mac computer is quite easy but if we think about Windows then it might be difficult and it will need more information and knowledge. However, we have such platforms that allow us to install a Mac operating system on windows like Virtualbox and Vmware Software. these two virtual machines are the best chance to use and install any Mac Operating system, Therefore, if you are Windows user then follow the below links and install the Mac Operating system on virtual machines.
Before, going to install MacOS Mojave 10.14 on PC-Hackintosh using Clover EFI Bootloader, you have to complete the required files which we will mention below, after that, follow step by step and you will be able to install MacOS Mojave.
Related Article:
How to Install MacOS Mojave on PC-Hackintosh?
As I mentioned we will install MacOS Mojave on Hackintosh using Clover EFI Bootloader, So, it will be somehow difficult and you might get confused but don't worry I will guide you step by step with good explanation.
Required Files:
- Download MacOS Mojave with your developer account on your Hackintosh OR
- Download MacOS Mojave dmg file
- 16GB USB Flash Drive
- 4GB USB for Post Installation
- Clover Boot Loader ( Newer Version )
- EFI partition from the USB
- EFI partition from the Mojave
- Download Realtek ALC235 Audio Kext complete file – Mediafire
- Download Realtek RTL8111 Ethernet Kext complete file – Mediafire
Step 1: Download MacOS Mojave dmg file
Of course to install MacOS Mojave you need to download Mojave dmg file then you can install it on your PC. downloading MacOS Mojave has two way, first, if you are Mac user then you can download it directly from App Store with your developer account if you are using Windows operating system then you don't have developer account, therefore, download MacOS Mojave dmg file from above link.
Step 2: Create a Bootable USB for MacOS Mojave
Well, to install MacOS Mojave whether on Hackintosh or Virtual Machine, firstly, you will need to download MacOS Mojave image file which I mentioned above, therefore, download MacOS Mojave dmg file. After you downloaded then you have to create a bootable USB for MacOS Mojave. creating MacOS Mojave bootable USB is good for having a clean installation on PC although you can install without USB if you go with it then you will have the best MacOS Mojave installation.
You might know how to create MacOS Mojave Bootable USB Installer if you know then do it yourself if you don't know then click on the link below and follow the steps. that way, you can create a bootable USB for MacOS Mojave.
As I have uploaded an article on How to Create MacOS Mojave Bootable USB Installer, therefore, I am not going to show you the steps, in this case, you have to read that article. Otherwise, follow the below steps to create a MacOS Mojave bootable USB.
- You Must Read:How to Create MacOS Mojave Bootable USB Installer
#1: To create a bootable USB for MacOS Mojave you will need to have 16GB USB flash drive, therefore, insert your USB drive to your computer.
#2: Then, use Command key + Space for the spotlight and search Disk Utility and press Enter key.
#3: Now, select your USB drive from the left side and click on Erase from the top menu. Afterward, follow this:
- Give a proper Name for USB Partition.
- Select Mac OS Extended (Journaled) for Format.
- And select GUID Partition Map for Scheme.
#4: Once you are done then click on Erase button and wait for a while then click on Done and close Disk Utility page.
#5: Open the Spotlight and search for Terminal, after that, copy and paste the below code to terminal and press Enter key. afterward, it will ask you to type your password and press enter key. While you press the Enter key then you will be asked to Enter Y key for confirmation, therefore, Press Y and wait for a while and close Terminal.
Step 3: Run Clover Configurator
- To run Clover Configurator, you need to download it on your PC.
- Now, open spotlight and search Clover Configurator and press Enter.
- Then, select the Mount EFI option from the left side.
- Afterward, select the EFI on install MacOS Mojave Beta and click on Mount Partition.
- Type your User password.
- While you Mounted EFI Partition then an EFI folder will be created to your desktop screen automatically.
- Therefore, open EFI external folder.
- You have to copy the EFI file into an external folder.
- After you copied then Eject the external EFI folder.
- You are done with this step and you have created EFI file of MacOS Mojave in a USB drive and you are ready to install MacOS Mojave on Hackintosh.
Step 4: Create Post-Install USB Drive
Now insert 4GB USB flash drive for creating post-installation and click on Go > Utilities and open Disk Utility. After that, follow the below steps.
- In Disk Utility, select your USB drive from the left side of the window and click on the Erase button from the top menu.
- Then, give a Name like (Post-Install), select Mac OS Extended (Journaled) for Format and select GUID Partition Map for Scheme.
- After that, click on Erase button and wait for a while and click on Done then close disk utility page.
- While the Post-install partition is done then copy and paste all the fixes drivers into Post-Install USB drive, after that, Eject the USB drive folder.
So, now the USB drive is ready to boot and we have copied all the files to Post-Install USB drive and the USB is ready to install macOS Mojave on Hackintosh but before going to install MacOS Mojave you have to configure BIOS setting.
Step 5: Configure BIOS Setting
- Download MacOS Mojave with your developer account on your Hackintosh OR
- Download MacOS Mojave dmg file
- 16GB USB Flash Drive
- 4GB USB for Post Installation
- Clover Boot Loader ( Newer Version )
- EFI partition from the USB
- EFI partition from the Mojave
- Download Realtek ALC235 Audio Kext complete file – Mediafire
- Download Realtek RTL8111 Ethernet Kext complete file – Mediafire
Step 1: Download MacOS Mojave dmg file
Of course to install MacOS Mojave you need to download Mojave dmg file then you can install it on your PC. downloading MacOS Mojave has two way, first, if you are Mac user then you can download it directly from App Store with your developer account if you are using Windows operating system then you don't have developer account, therefore, download MacOS Mojave dmg file from above link.
Step 2: Create a Bootable USB for MacOS Mojave
Well, to install MacOS Mojave whether on Hackintosh or Virtual Machine, firstly, you will need to download MacOS Mojave image file which I mentioned above, therefore, download MacOS Mojave dmg file. After you downloaded then you have to create a bootable USB for MacOS Mojave. creating MacOS Mojave bootable USB is good for having a clean installation on PC although you can install without USB if you go with it then you will have the best MacOS Mojave installation.
You might know how to create MacOS Mojave Bootable USB Installer if you know then do it yourself if you don't know then click on the link below and follow the steps. that way, you can create a bootable USB for MacOS Mojave.
As I have uploaded an article on How to Create MacOS Mojave Bootable USB Installer, therefore, I am not going to show you the steps, in this case, you have to read that article. Otherwise, follow the below steps to create a MacOS Mojave bootable USB.
- You Must Read:How to Create MacOS Mojave Bootable USB Installer
#1: To create a bootable USB for MacOS Mojave you will need to have 16GB USB flash drive, therefore, insert your USB drive to your computer.
#2: Then, use Command key + Space for the spotlight and search Disk Utility and press Enter key.
#3: Now, select your USB drive from the left side and click on Erase from the top menu. Afterward, follow this:
- Give a proper Name for USB Partition.
- Select Mac OS Extended (Journaled) for Format.
- And select GUID Partition Map for Scheme.
#4: Once you are done then click on Erase button and wait for a while then click on Done and close Disk Utility page.
#5: Open the Spotlight and search for Terminal, after that, copy and paste the below code to terminal and press Enter key. afterward, it will ask you to type your password and press enter key. While you press the Enter key then you will be asked to Enter Y key for confirmation, therefore, Press Y and wait for a while and close Terminal.
Step 3: Run Clover Configurator
- To run Clover Configurator, you need to download it on your PC.
- Now, open spotlight and search Clover Configurator and press Enter.
- Then, select the Mount EFI option from the left side.
- Afterward, select the EFI on install MacOS Mojave Beta and click on Mount Partition.
- Type your User password.
- While you Mounted EFI Partition then an EFI folder will be created to your desktop screen automatically.
- Therefore, open EFI external folder.
- You have to copy the EFI file into an external folder.
- After you copied then Eject the external EFI folder.
- You are done with this step and you have created EFI file of MacOS Mojave in a USB drive and you are ready to install MacOS Mojave on Hackintosh.
Step 4: Create Post-Install USB Drive
Now insert 4GB USB flash drive for creating post-installation and click on Go > Utilities and open Disk Utility. After that, follow the below steps.
- In Disk Utility, select your USB drive from the left side of the window and click on the Erase button from the top menu.
- Then, give a Name like (Post-Install), select Mac OS Extended (Journaled) for Format and select GUID Partition Map for Scheme.
- After that, click on Erase button and wait for a while and click on Done then close disk utility page.
- While the Post-install partition is done then copy and paste all the fixes drivers into Post-Install USB drive, after that, Eject the USB drive folder.
So, now the USB drive is ready to boot and we have copied all the files to Post-Install USB drive and the USB is ready to install macOS Mojave on Hackintosh but before going to install MacOS Mojave you have to configure BIOS setting.
Step 5: Configure BIOS Setting
#1: Now, restart your PC and press Delete button to bring the BIOS setting.
#2: Go to Save and Edit menu tab and select Load Optimized Defaults and press Enter key. after that select yes option. Once again click on Save and Edit set up on the same page and click Yes, afterward, your computer will restart automatically.
#3: Now, press Delete key to bring BIOS settings.
#4: Go to BIOS tab and Disabled fast boot option. then select 2x for Mouse Speed, then select Other OS for Windows 8/10 features, then select Legacy for Storage Boot option control, and select UEFI for other PC1 devices.
#5: Then, go to Peripherals tab and select PCI 1 Slot for Initial Display Output, then Disabled Intel platform trust technology (PTT).
#6: On the same page select USB Configuration then Enabled XHCI Hand-Off.
#7: Come back and select SATA And RST Configuration, then make sure you have selected AHCI for SATA Mode Selection.
#8: Now go to Chipset tab and Disabled VT-d.
#9: At last go to Save and Exit tab and click on Save and Exit setup and click on yes button.
So, you have configured BIOS setting successfully, and you are ready to install MacOS Mojave on Hackintosh PC.
Step 6: Install MacOS Mojave on PC Macintosh HD
Now everything is done and you have configured BIOS setting, therefore, now it is time to install MacOS Mojave from USB flash drive. so, insert the USB drive and restart your computer, after that, go to Boot Menu and select your USB to install MacOS Mojave. Then follow the below steps.
- #1: On welcome page select Option and type -v nv_disabled=1_for Boot Args and press enter key.
- #2: Now, Boot MacOS install from install MacOS Mojave, therefore, click on Apple Logo and press enter.
- #3: Bypass black and white text and wait for a while.
- #4: Here, select your language and continue.
- #5: Then, select Disk Utility and continue.
- #6: Now, go to View menu tab and click on Show all devices.
- #7: Afterward, select the USB that you want to boot MacOS Catalina and click on Erase option from the top menu. then give a Name to the USB, select APFS for Format, and select GUID Partition Map for Scheme and click on Erase button and wait to complete the partition and click on Done. at last close the disk utility folder.
- #8: Now, select Install MacOS and continue.
- #9: click on Continue.
- #10: Then, agree to the terms and continue.
- #11: After that, select Macintosh HD and install MacOS Mojave on Macintosh HD.
So, you have installed MacOS Mojave on Macintosh HD successfully. now Boot MacOS Mojave to Macintosh HD.
Step 7: Boot MacOS Mojave from Macintosh HD
- Press F12 for Boot menu and select your USB drive and press Enter.
- Then, select option and type -v nv_disabled=1_for Boot Args and press enter key.
- This time boot MacOS install from Macintosh HD, therefore, select second Apple Logo and press Enter key.
- Wait for some minutes to install MacOS Mojave on Macintosh HD.
- Now your Computer will restart.
- Again press f12 for Boot menu and select your USB drive and press enter.
- Now, select option and type -v for boot args and press enter key.
- Then Boot MacOS from Macintosh HD and press enter key.
Step 8: Install macOS Mojave on Hackintosh
- Select your country and continue.
- Select your keyboard layout and continue.
- Then, select My computer is not connect to the internet and continue.
- On data and privacy click continue.
- Select don't transfer any information and click continue.
- Agree to the terms and condition.
- Now create a new user for computer, therefore, give a Full name, Account name, password, and Password Hint. then click on Continue.
- On express set up click on Continue.
- Now select your theme whether light mode or dark mode and click on continue.
- After that, it will be setting up your MacOS.
- You have installed MacOS Mojave on PC-Hackintosh HD successfully, now you can use MacOS Mojave on your PC Hackintosh.
Read Also:
Conclusion
That's all about How to install macOS Mojave on PC-Hackintosh, So, I have explained everything and all the steps you need is included in this article. So, follow each step one by one and don't miss any line because you will face problems during the installation. Moreover, I hope the article was helpful for you and if you have any question then feel free to ask me in the comment box.
Creating a bootable USB drive of OS X Yosemite 10.10 if you want to save it on a external drive for future usage or just want to install it on multiple Mac computers. To make OS X Yosemite bootable USB installer drive, there are few requirements. Lets see what are those.
Note: This guide to make installer USB drive is for OS X Yosemite Developer Preview
See also: Dual Boot OS X Yosemite and Mavericks
Make OS X Yosemite Bootable USB
Requirements
- You must have an external USB drive or storage media with capacity of at-least 8GB (Save data from it because we are going to format it).
- OS X Yosemite installer downloaded (You can join OS X Beta program)
Prepare USB drive for OS X Yosemite
Open Disk Utility from 'Applications' > 'Utilities' or press 'cmd+space' keys form keyboard to find 'Disk Utility'.
Plug the external USB drive into Mac (make sure you save your stuff from it). Once you attached the USB drive, it will shown on the left panel of Disk Utility.
Select the drive and then do the following steps to create a single partition that is required to make USB installer drive for OS X Yosemite 10.10.
Install Dmg On Iphone
Click on 'Partition Layout' drop-down menu and select '1 Partition' option from it.
Then enter the Partition information Name: 'osxyosemite', Format: 'Mac OS Extended (Journaled)'.
Click the 'Options' button to select the partition scheme, so select 'GUID Partition Table' option and click OK button.
To complete the creating partition process hit the 'Apply' button and then 'Partition' button. This will take some time to format and making USB drive as a 1 partition. Once done, you will notice a new drive name will be displayed on the left side, the name that you given in the partition information. Now close the Disk Utility tool.
Show hidden files
Clover Install Dmg On External Drive File
Showing hidden files is required, because there are few hidden files in the OS X Yosemite installer package that you need to unhide first to write them on bootable USB drive.
Open Mac 'Terminal' command line: press cmd+space keys and type Terminal in the spotlight, click the Terminal from search results or just open the Terminal from Applications > Utilities > Terminal.
Type the following two commands one by one:
defaults write com.apple.finder AppleShowAllFiles YES
Killall Finder
First command is going to show hidden files and the second one is to restart the Finder so we can see the instant effect of first command. Close the Terminal.
Open Applications, here you will see your downloaded OS X Yosemite file 'Install OS X 10.10'. Cmd+click on it to view the menu, select 'Show Package Contents'.
Open 'Contents' > 'SharedSupport' folder and here you will see 'InstallESD.dmg' file, double click to open the file and OS X may starts verifying this file so let the verification process finished.
After that you will see a folder with the following content in it, 'BaseSystem.dmg' is the file that we need and it was hidden, so now you know that why we show the hidden files in above steps.
Open the Disk Utility again from 'Applications' > 'Utilities' > 'Disk Utility' or by using Spotlight search.
Load the 'BaseSystem.dmg' file into the Disk Utility, right-click on the file and choose 'Open With' > 'Disk Utility' option. After doing that open the Disk Utility and you will see the file 'BaseSystem.dmg' is loaded in the Disk Utility on the left side.
Restore Disk Image
Now we are going to restore 'BaseSystem.dmg' disk image on the USB drive.
Select your USB partition that we created in previous first steps, then click the Restore tab.
Under Restore tab there are two fields, Source and Destination.
Click and drag the 'BaseSystem.dmg' to Source field and 'osxyosemite' usb drive to Destination filed, see screenshot below to get more idea. When done hit the Restore button and you need to confirm 'Are you sure you want to replace the content on USB drive with the content of disk image' so click the Erase button to confirm, after that you may need to enter the administrator password. Restoring disk image is time taking process so be patient.
Clover Install Dmg On External Drive Mac
Once the restoring disk image process is finished you will see a folder like this. Here, open the 'System' > 'Installation' folders and move the Packages file to trash.
Copy the 'Packages' folder from the folder where the 'BaseSystem.dmg' exist. and paste it into the Installation folder that you just opened in previous step.
Apple live wallpaper free download. Hide the system files again using this commanddefaults write com.apple.finder AppleShowAllFiles NO
How to Boot from USB Drive
You must know the system requirements of OS X Yosemite before installing it, If your system to capable to run this OS X version 10.10 then Shutdown your Mac, plug the OS X Yosemite Bootable USB into Mac. Press the power button again to turn it On and then hold the Alt or Option key from keyboard, when you see this screen release the button. Double click on the USB drive to boot from it.
Clover Install Dmg On External Drive Iphone
Congratulations! you successfully perform all steps to make bootable USB drive to install OS X Yosemite on more that one Mac computers without worried of downloading it on each computer separately, you will saved lot of bandwidth and time as well. Thanks for reading if you have any problem we are here to help you just write your problem below in comments box.
When I download the new Quicken there is an item in my download file called 'Quicken2017.dmg' That is as far as it goes. When I click on that I get an Adobe Photoshop Elements dialogue box that says 'some of the application components are missing from the Application directory. I finally contacted at Quicken. The problem was my Mac. Mac says doesnt recognize quicken dmg.